WHATEVER IT TAKES!

Crusher repairs, parts & service

 

reconditioned telsmith 48s           D-Style gyrasphere crusher


Listing Type:           Reconditioned Crusher

Model / Part No.:   48S Gyrasphere Cone

Manufacturer:              Telsmith

Condition:                     See Description

Available Date:             2-3 WEEKS

Serial Number:             202M8504

Job Number:                 4856

Year of Manufacture:  1974

Manganese Condition:New

Location:                       Racine, Wisconsin

Price:                 Available upon Request




Description:

Main Frame: in good condition, Main Frame seat good,  New full length AR Steel Main Frame Liner.  Additional new intermediate AR Steel main frame liner in the high wear zone area. New Countershaft box and arm shields.  Outer Bronze sleeve and snap ring are in New Condition.  New Bakelite Seals. New Overload Spring Assembly Hardware.


Upper Frame:  Buttress bowl threads in good condition.  Upper frame seat in good condition.  New inner and outer felt seals.


Support Bowl Assembly:  Support Bowl and lock nut buttress threads in good condition.  New Manganese Concave Ring seating surface. New manganese concave ring of your Choice installed and poured.  New Hydraulic Unlock system installed, New Lock nut felt seal packed with grease.


Head & Shaft Assembly:  Reconditioned Head and Shaft assembly.  New Manganese Mantle assembly installed and poured.


Eccentric Assembly:  New Inner Bronze sleeve. New Rotary Seal Ring. New Upper and Lower Thrust Bearings.  Upper and Lower piston rings within new specifications.  Eccentric Shaft within new specifications. New Upper Bakelite seals.  Main Drive Gear in Good condition. 


Countershaft Box Assembly:  Flywheel sheave in good condition.  Countershaft in good condition.  New countershaft bearings, seal and gaskets.  Pinion gear in good condition.  Countershaft Box in good condition.


What is included:  

Warranty:  Six (6) Months for defects in materials or workmanship with approved application and operation of equipment.

NO WIRING, CONTROL CABINETS, MOTORS INCLUDED UNLESS NOTED.  NO FOUNDATIONS, REINFORCING STEEL, FOUNDATION BOLTS, PIPING AND CONDUIT, SUPPORTING STRUCTURES, CHUTES, WALKWAY OR WALKWAY FLOORING INCLUDED UNLESS SPECIFIED.  FEDERAL AND LOCAL SAFETY CODES MAY REQUIRE THE USE OF SPECIAL GUARDS, SAFETY SHUTDOWN DEVICES, ETC. WHICH UNLESS OTHERWISE SPECIFIED, ARE NOT PART OF THE EQUIPMENT.  COMPLIANCE WITH SUCH LAWS IS THE OWNER'S RESPONSIBILITY AND, AS SUPPLIERS, WE WILL SUPPLY THESE ITEMS, TO MEET SUCH CODES, IF REQUIRED, AT EXTRA COST.  DUTIES, FEDERAL OR STATE SALES, USE, EXCISE AND/OR SIMILAR TAXES WHICH APPLY SHALL BE FOR THE PURCHASER'S ACCOUNT.  LISTING MAY CONTAIN INCORRECT INFORMATION, INACCURACIES OR DISCREPANCIES THESE ARE NOT INTENTIONAL AND ARE NOT THE RESPONSIBILITY OF THE SELLER.

Description:

Main Frame: in very good condition, Main Frame seat like new, New full length AR Steel Main Frame Liner.  Additional new intermediate AR Steel main frame liner in the high wear zone area. New Countershaft box and arm shields.  Outer Bronze sleeve and snap ring are within new tolerances.  New Bakelite Seals.


Upper Frame:  Buttress bowl threads in very good condition.  Upper frame seat like new,  New inner and outer felt seals.


Support Bowl Assembly:  Support Bowl and lock nut buttress threads in very good condition.  Manganese Concave seat is within new tolerances.  New manganese concave ring installed and poured. New Hydraulic Unlock system installed, New Lock nut felt seal packed with grease.


Head & Shaft Assembly:  Reconditioned Head and Shaft.  New Manganese Mantle assembly installed and poured.


Eccentric Assembly:  Inner Bronze sleeve within new tolerance.  New upper and lower Thrust Bearings.  Upper and Lower piston rings are in new condition.  Rotary seal ring in very good condition, Eccentric Shaft in very good condition.  Main Drive Gear in very good condition.  New Upper Bakelite seals.


Countershaft Box Assembly:  Flywheel sheave in very good condition, countershaft within new tolerances.  New countershaft bearings and seal.  Pinion gear in very good condition.  Countershaft Box in very good condition.


What is included:  

Warranty:  Six (6) Months for defects in materials or workmanship with approved application and operation of equipment.


NO WIRING, CONTROL CABINETS, MOTORS INCLUDED UNLESS NOTED.  NO FOUNDATIONS, REINFORCING STEEL, FOUNDATION BOLTS, PIPING AND CONDUIT, SUPPORTING STRUCTURES, CHUTES, WALKWAY OR WALKWAY FLOORING INCLUDED UNLESS SPECIFIED.  FEDERAL AND LOCAL SAFETY CODES MAY REQUIRE THE USE OF SPECIAL GUARDS, SAFETY SHUTDOWN DEVICES, ETC. WHICH UNLESS OTHERWISE SPECIFIED, ARE NOT PART OF THE EQUIPMENT.  COMPLIANCE WITH SUCH LAWS IS THE OWNER'S RESPONSIBILITY AND, AS SUPPLIERS, WE WILL SUPPLY THESE ITEMS, TO MEET SUCH CODES, IF REQUIRED, AT EXTRA COST.  DUTIES, FEDERAL OR STATE SALES, USE, EXCISE AND/OR SIMILAR TAXES WHICH APPLY SHALL BE FOR THE PURCHASER'S ACCOUNT.  LISTING MAY CONTAIN INCORRECT INFORMATION, INACCURACIES OR DISCREPANCIES THESE ARE NOT INTENTIONAL AND ARE NOT THE RESPONSIBILITY OF THE SELLER.

reconditioned TELSMITH 48fc  gyrasphere crusher


Listing Type:           Reconditioned Crusher

Model / Part No.:   48FC Gyrasphere Cone

Manufacturer:              Telsmith

Condition:                     See Description

Available Date:             2-3 WEEKS

Serial Number:             Not Available

Job Number:                 4828

Year of Manufacture:  Not Available

Manganese Condition: New

Location:                       Racine, Wisconsin

Price:                 Available upon Request




Milwaukee Crusher Company LLC © 2015  ALL RIGHTS RESERVED. 

262.456.6558

orders & Support

equipment for sale   IN-STOCK, JUST ADD ROCK

Description:

Main Frame: in good condition, Main Frame seat good, New full length AR Steel Main Frame Liner.  Additional new intermediate AR Steel main frame liner in the high wear zone area. New Outer Bronze sleeve and snap ring.  New Bakelite Seals.


Upper Frame:  Buttress bowl threads in good condition.  Upper frame seat good,  New inner and outer felt seals.


Support Bowl Assembly:  Support Bowl and lock nut buttress threads in good condition.  New Manganese Concave seat surface. New manganese concave ring of your choice to be installed and poured. New Lock nut felt seal packed with grease.


Head & Shaft Assembly:  Head and Shaft in good condition.  New Manganese Mantle assembly installed and poured.


Eccentric Assembly:  New Inner Bronze sleeve installed.  New Lower Thrust Bearing, Upper Thrust Bearing Good.  Upper and Lower piston rings are in good condition.  New Rotary seal ring installed.  Eccentric Shaft in good condition.  Main Drive Gear in good condition.  New Upper Bakelite seals.


Countershaft Box Assembly:  Flywheel sheave reconditioned.  New countershaft and new countershaft bearings and gaskets installed.  Pinion gear in good condition.  Countershaft Box in good condition.  New oil pump and seal.


What is included:  

Warranty:  One Year for defects in materials or workmanship with approved application and operation of equipment.


NO WIRING, CONTROL CABINETS, MOTORS INCLUDED UNLESS NOTED.  NO FOUNDATIONS, REINFORCING STEEL, FOUNDATION BOLTS, PIPING AND CONDUIT, SUPPORTING STRUCTURES, CHUTES, WALKWAY OR WALKWAY FLOORING INCLUDED UNLESS SPECIFIED.  FEDERAL AND LOCAL SAFETY CODES MAY REQUIRE THE USE OF SPECIAL GUARDS, SAFETY SHUTDOWN DEVICES, ETC. WHICH UNLESS OTHERWISE SPECIFIED, ARE NOT PART OF THE EQUIPMENT.  COMPLIANCE WITH SUCH LAWS IS THE OWNER'S RESPONSIBILITY AND, AS SUPPLIERS, WE WILL SUPPLY THESE ITEMS, TO MEET SUCH CODES, IF REQUIRED, AT EXTRA COST.  DUTIES, FEDERAL OR STATE SALES, USE, EXCISE AND/OR SIMILAR TAXES WHICH APPLY SHALL BE FOR THE PURCHASER'S ACCOUNT.  LISTING MAY CONTAIN INCORRECT INFORMATION, INACCURACIES OR DISCREPANCIES THESE ARE NOT INTENTIONAL AND ARE NOT THE RESPONSIBILITY OF THE SELLER.

*Equipment descriptions and information are subject to change and may be subject to unintentional human errors, please contact Milwaukee Crusher with any questions or comments.  

Company

reconditioned TELSMITH 48FC

D-STYLE gyrasphere crusher


Listing Type:           Reconditioned Crusher

Model / Part No.:   48FC D-Style Gyrasphere Cone

Manufacturer:              Telsmith

Condition:                     See Description

Available Date:             2-3 WEEKS

Serial Number:             202M8226

Job Number:                 4820

Year of Manufacture:  1971

Manganese Condition:New

Location:                       Racine, Wisconsin

Price:                 Available upon Request




Description:

Main Frame: in very good condition, Main Frame seat like new, New full length AR Steel Main Frame Liner.  Additional new intermediate AR Steel main frame liner in the high wear zone area. New Countershaft box and arm shields.  Outer Bronze sleeve and snap ring are within new tolerances.  New Bakelite Seals.


Upper Frame:  Buttress bowl threads in very good condition.  Upper frame seat like new,  New inner and outer felt seals.


Support Bowl Assembly:  Support Bowl and locknut buttress threads in very good condition.  Manganese Concave seat is within new tolerances.  New manganese concave ring installed and poured. New Hydraulic Unlock system installed, New Locknut felt seal packed with grease.


Head & Shaft Assembly:  Reconditioned Head and Shaft.  New Manganese Mantle assembly installed and poured.


Eccentric Assembly:  Inner Bronze sleeve within new tolerance.  New upper and lower Thrust Bearings.  Upper and Lower piston rings are in new condition.  Rotary seal ring in very good condition, Eccentric Shaft in very good condition.  Main Drive Gear in very good condition.  New Upper Bakelite seals.

Countershaft Box Assembly:  Flywheel sheave in very good condition, countershaft within new tolerances.  New countershaft bearings and seals.  Pinion gear in very good condition.  Countershaft Box in good condition. Rebuilt Pump housing with New Oil pump.

Options- Pick :  
Air to Oil cooler assembly, No water returned 

Water type heat exchanger if water is available  

Warranty:  One Year for defects in materials or workmanship with approved application and operation of equipment.


​NO WIRING, CONTROL CABINETS, MOTORS INCLUDED UNLESS NOTED.  NO FOUNDATIONS, REINFORCING STEEL, FOUNDATION BOLTS, PIPING AND CONDUIT, SUPPORTING STRUCTURES, CHUTES, WALKWAY OR WALKWAY FLOORING INCLUDED UNLESS SPECIFIED.  FEDERAL AND LOCAL SAFETY CODES MAY REQUIRE THE USE OF SPECIAL GUARDS, SAFETY SHUTDOWN DEVICES, ETC. WHICH UNLESS OTHERWISE SPECIFIED, ARE NOT PART OF THE EQUIPMENT.  COMPLIANCE WITH SUCH LAWS IS THE OWNER'S RESPONSIBILITY AND, AS SUPPLIERS, WE WILL SUPPLY THESE ITEMS, TO MEET SUCH CODES, IF REQUIRED, AT EXTRA COST.  DUTIES, FEDERAL OR STATE SALES, USE, EXCISE AND/OR SIMILAR TAXES WHICH APPLY SHALL BE FOR THE PURCHASER'S ACCOUNT.  LISTING MAY CONTAIN INCORRECT INFORMATION, INACCURACIES OR DISCREPANCIES. THESE ARE NOT INTENTIONAL AND ARE NOT THE RESPONSIBILITY OF THE SELLER.

reconditioned telsmith 6614S gyrasphere crusher


Listing Type:           Reconditioned Crusher

Model / Part No.:   6614S Gyrasphere Cone

Manufacturer:              Telsmith

Condition:                      See Description

Available Date:              2-3 WEEKS

Serial Number:             202M8937
​Job Number:                 3835

Year of Manufacture:  1978

Liner Condition:           New

Location:                       Racine, Wisconsin

Price:                 Available upon Request




All Equipment available and ready to ship when you need it.  All equipment has been thoroughly inspected and critical dimensions corrected or verified to meet all required specifications. Please contact us with any questions you may have.   Equipment availability subject to prior sale.*